- Dosdude1's High Sierra Patcher
- Dosdude Patcher Mojave
- Dosdude Big Sur Patcher
- Dosdude Patcher Catalina Reviews
- Dosdude1 Patcher
I also have a YouTube video going over the whole process.
Requirements:
- Early-2008 or newer Mac Pro, iMac, or MacBook Pro(MacPro 3,1 and 4,1, iMac 8,1 and 9,1, MacBook Pro 4,1, 5,1 5,2, 5,3,5,4, and 5,5)
- Late-2008 or newer MacBook Air or Aluminum Unibody MacBook (MacBookAir 2,1, MacBook 5,1)
- Early-2009 or newer Mac Mini or white MacBook (Macmini 3,1, MacBook 5,2)
- Early-2008 or newer Xserve (Xserve 2,1, Xserve 3,1)
Machines that ARE NOT supported:
- 2006-2007 Mac Pros, iMacs, MacBookPros, and Mac Minis (MacPro 1,1 and 2,1, iMac 4,1, 5,1, 5,2, 6,1 and7,1, MacBook Pro 1,1, 2,1, and 3,1, Macmini 1,1 and 2,1)
-- The 2007 iMac 7,1 is compatible if the CPU is upgraded to a Penryn-based Core 2 Duo, such as a T9300.
- 2006-2008 MacBooks (MacBook 1,1, 2,1 3,1 and 4,1)
- 2008 MacBook Air (MacBookAir 1,1)
-- Note: Make sure SIP is disabled on the system you intend to installHigh Sierra on. If it's not or you're unsure, just boot into your Recoverypartition of your currently installed copy of OS X, open Terminal, andrun 'csrutil disable'.
Things you'll need:
- A copy of the macOS High Sierra InstallerApp. This can be obtained from the Mac App Store using a machinethatsupports High Sierra, or by using the built-in downloading feature of the tool. In the Menu Bar, simply select 'Tools > Download macOS High Sierra...'
- A USB drive that's at least 8 GB in size
- A copy of the tool - Download here (Current version: 2.7.0, SHA1: 73f180d30200ef5f6d900440fe57b9c7d22bd6bf)
-- View changelog and download older versions here
Known issues:
- Trackpad (MacBook5,2 affected only). The trackpad in the MacBook5,2isn't fully supported in High Sierra. While it works and is fully usable,High Sierra detects it as just a standard mouse, preventing you fromchanging some trackpad-oriented settings.
How to use:
1. Insert your desired USB drive, open Disk Utility, and format it as OS X Extended (Journaled).
2. Open the 'macOS High Sierra Patcher' tool, and browse for your copy of the macOS High Sierra Installer App.
*Ensure that the tool successfully verifies the app.
3. Next, select your USB drive in the Target Volume list, and click 'Start Operation.'
4. When the operation completes, boot your target unsupported Mac offthe USB drive you just created by holding down the Option key while turning on the machine, and selecting the drive.
Note: Only perform steps 5 and 6 if you intend to do a clean install.Otherwise, you can simply skip these steps and install to your volumecontaing a previous version of OS X, and it'll do an in-place upgrade.
5. When the installer boots, open Disk Utility from the Utilities menu, or by double-clicking it in the Utilities window on the bottom left corner of the screen.
6. Select the disk or partition you want to install on, and erase it,ensuring to use either Mac OS Extended (Journaled), or APFS as the filesystem type.If formatting an entire drive, ensure GUID is selected.
-- Please note that if you use APFS, you will not have a bootable Recovery partition.
-- It is recommended that you only use APFS if the target drive is an SSD.
-- If you decide to use APFS, a custom booting method will be installed by the post-install tool, as the firmware of these unsupported machines does not natively support booting from APFS volumes. It is not quite as clean as native booting, but will not cause any issues while running High Sierra. A demo of the modified booting process can be viewed here.
7. Install macOS normally onto the desired volume.
8. When the install completes, reboot back onto the installer drive.This time, open the 'macOS Post Install' application.
9. In the application, select the Mac model you are using. The optimalpatches will be selected for you based on the model you select. You canalso select other patches of your choosing.
-- The 'i' button next to each patch will show more details about the respective patch.
10. Select the volume you have just installed macOS High Sierra on, andclick 'Patch.' When it finishes patching, click 'Reboot'. It may sitthere for a few moments rebuilding caches before rebooting.
-- If for somereason the system fails to work correctly after rebooting, boot backinto your installer drive, run the post install patch again, and select'Force Cache Rebuild' before rebooting. This isn't necessary under mostcircumstances.
11. When it reboots, it should now boot into a fully working copy ofmacOS High Sierra.
Additional Info:
- If selected in the macOS Post Install tool, your High Sierra install will have a program named 'Patch Updater' located in your /Applications/Utilities folder. This program will alert you when new updates to patches are available for your machine, and will prompt you to install them. If you do not have Patch Updater installed, but would like it, you can download and run the script found here to do so.
Updates
System updates, such as 10.13.1, should install normally if 'Software Update Patch' was selected in the macOS Post Install tool, or installed using the Patch Updater program. If for some reason updates aren't showing up, or you did not apply the patch, you can install it manually using the script found here.
-- If the machine does not start up properly after applying a system update, you will need to boot off your patched installer volume, and re-run the post-install patch on your High Sierra volume. Ensure you select 'Force Cache Rebuild' before rebooting.
FAQ:
Q: The tool created the USB drive successfully, but when booting, the progress bar hangs a bit more than half way.
A: Check your copy of the Install macOS High Sierra App. If you're using thelatest version of the tool, you must be using the latest version of theInstall macOS High Sierra App. Version 1.1 ofthe patch tool and older support older versions of the installer app.
Q: The patch tool gives me errors, such as 'Error copying files...'.
A: Check to make sure your USB drive is writeable. Try re-formatting it, or just try a different USB drive.
Q: The patch tool gives me a 'Mounting Failed' error
A: Check to make sure your Install macOS High Sierra App is the correct one.It should be around 5GB in size. If you used the 'Skip App Verification' option, you have most likely selected an invalid app thatdoesn't contain the necessary files.
Q: I cannot open my copy of Install macOS High Sierra with the patch tool.
A: If you downloaded the copy linked above, it is distributed inside aDMG file. You must open this file (mount it) to access the InstallmacOS High Sierra App you need to select.
Q: I don't see my hard drive partition in the installer screen or in the post-install tool.
A: Make sure FileVault is disabled, or use the instructions found here to unlock it manually using Terminal.
Q: I get a 'NO' symbol when starting up after successfully installing High Sierra.
A: Make sure you have run the post-install patch on the correct volume, as detailed above in steps 8-10.
Q: I get a 'NO' symbol when starting up from the patched USB drive
A: Check the supported/not supported list at the top of this page. Ensure your machine is in the supported list.
Q: My iSight camera doesn't work after installing High Sierra
A: Make sure you properly remove (using the program's uninstaller, not by simply dragging the application to the Trash) all virtual machine software installed on your machine, such as VirtualBox, VMWare, etc.
Q: I get 'NSURL' errors when trying to update my machine or use the App Store
A: This is usually the result of having an invalid CatalogURL set. To revert to stock, simply run 'sudo softwareupdate --clear-catalog' in Terminal, and then run the software update patch script located above.
Q: Safari, App Store, and/or Mail stopped working after installing a system update
A: Download and run the Onyx application, select 'Maintenence' at the top, then click the Run button.
Q: I get a 'No packages were eligible for install' error when attepting to install High Sierra
A: This is due to your system's date and time being set incorrectly. To fix it, you can either boot into your current OS X install and set the date, or you can use Terminal after booting from your patched USB installer drive to set the date. Instructions to set the date using Terminal can be found here.
While the app can still be used for macOS By using this patching software on your Unsupported Mac, you can enjoy the various features and added security that modern Macs have. Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor.
fixed : install OSX 10.11 El_Capitan on unsupported Macs
Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem. Nulla consequat massa quis enim. An update to the MacPostFactor was released on July 8, Also, by updating the system software of your Mac, you can enjoy various additional features and enhanced security. Always use to the latest version.
Regret updating from 10.5.5 (01) to 10.5.5 (02) using MacOS Catalina Patcher V1.4.4 and new MacOS Catalina Install download on a Late 2009 iMac does not work. Alway get 'MacOS cannot be installed on this machine.' Have restored (using TimeMachine) my working 10.5.5 (01) several times and re-tried the (02) update to no avail. Check out DosDude’s Mojave Patcher and walk through here to get macOS Mojave running on an unsupported Mac; The DosDude website has both a complete tutorial available at the link above along with the downloadable patcher tool. Patched Sur is a UI patcher for macOS Big Sur, designed to make it easy to run macOS 11 on unsupported Macs. This patcher hopes to allow any user of any knowledge to patch their Mac, while still giving you freedom on how you want to use your Mac.
Never download this from any other provider. All links must link to this page or directly from Kelian's server. This is to ensure that nothing was tampered with and that you have the most reliable and tested software.
MacPostFactor v2. It features many improvements everywhere! Anyway, in this version, you'll find:. See if your Mac can handle the Patcher. Tested Macs listed below. Here are the minimum requirements:. All other company and product names are trademarks or registered trademarks of their respective companies. Beautifully Deviant of the Rules Lorem ipsum dolor sit amet, consectetuer adipiscing elit.
Release Notes. Latest Update: 2. Verison History. Add some verbosity to the install process for logs. System Requirements See if your Mac can handle the Patcher. General Requirements Running Download Size: MB Download. Verison 2. Verison 1. Verison 0.Citing various incompatibilities and hardware deficiencies, they cut out a large swathe of machines from running Sierra.
However, many Mac owners have questioned their motives, observing that some machines have made the cut whilst their more powerful contemporaries such as the MacBook Pro have mysteriously been left behind.
Dosdude1's High Sierra Patcher
Please note, some machines have issues, as the table reports. The most common is a lack of Wi-Fi due to the unsupported BCM card in some machines, but this can often be replaced.
If you have one of the models listed above and want to give Sierra a try, follow our instructions below to make a modified Sierra installer with Sierra Patcher.
To download this via the Mac App Store you will need access to a supported machine. However, a direct download or a download inside a macOS VM can circumvent this requirement. SIP must remain disabled at all times for this method to work, even after initial installation.
Do not be alarmed by this. Navigate to your Applications folder and select it. Enter your password when prompted. I recommend doing this for a fresh start. The installation will now begin. Keep an eye on it, as it will reboot halfway through to complete the installation and you must be ready when it does.
The machine will try to boot up and fail. Simply hold the power button down until it turns off, then turn it on again. The utility correctly identified my machine as a MacBookPro5,5 so that is what I selected from the list. This is the only must-have patch which is not enabled by default. Mine was called Macintosh HD. This is only useful if your patches do not seem to have taken hold for any reason. This time, at the boot drive selection screen, do not select the USB drive, select the hard drive of your unsupported machine to boot from.
The machine will now boot up and finish the installation. Allow it to complete and it should take you into your new Sierra installation on your supposedly unsupported Mac. The patcher is still being updated so you can expect support to continue through future versions of Sierra too. A recent update to the tool also enabled macOS updates to be received through the Mac App Store, so even that aspect is vanilla now.
Please note that if you are using a Hackintosh and not a real Mac then this tool is not needed.
The patcher is only required for genuine Mac hardware. Got a machine which was cruelly shunned by macOS Sierra? Let me know whether this guide breathes new life into it.Questions or comments? I also have a YouTube video going over the whole process. If it's not or you're unsure, just boot into your Recovery partition of your currently installed copy of OS X, open Terminal, and run 'csrutil disable'.
This can be obtained from the Mac App Store using a machine that supports High Sierra, or by using the built-in downloading feature of the tool. The trackpad in the MacBook5,2 isn't fully supported in High Sierra. While it works and is fully usable, High Sierra detects it as just a standard mouse, preventing you from changing some trackpad-oriented settings. How to use: 1.
When the operation completes, boot your target unsupported Mac off the USB drive you just created by holding down the Option key while turning on the machine, and selecting the drive. Note: Only perform steps 5 and 6 if you intend to do a clean install.
Otherwise, you can simply skip these steps and install to your volume containg a previous version of OS X, and it'll do an in-place upgrade. When the installer boots, open Disk Utility from the Utilities menu, or by double-clicking it in the Utilities window on the bottom left corner of the screen.
If formatting an entire drive, ensure GUID is selected. It is not quite as clean as native booting, but will not cause any issues while running High Sierra.
A demo of the modified booting process can be viewed here. Install macOS normally onto the desired volume. When the install completes, reboot back onto the installer drive. This time, open the 'macOS Post Install' application. In the application, select the Mac model you are using. The optimal patches will be selected for you based on the model you select. You can also select other patches of your choosing.Be sure to have root privileges administrator password as OS X will prompt you for this on some stage.
Make sure your Mac meets the Requirements above 5. Install macOS Extractor. The AutoPatch Tool will unmount that when its done.
How To Install macOS Mojave On An Unsupported iMac ( Tutorial for incompatible iMacs )Dosdude Patcher Mojave
During the AutoPatch installation. If the installation drive boots you back to the main partition, try blessing the drive from your terminal app: Code:. If the Mac does not reboot to the El Capitan desktop boot to the installation drive again and perform the following.
Open the 'Kexts' Folder 3. Choose your Graphics Card Kext Installer and launch it. Install it. Admin privileges required 5. Restart your Mac.
We are not liable if your computer explode, fail to wake you up for work, lose important files, pictures, porn or simply ceased to work. Always backup your existing installation before installing MacPostFactor or install in a second partition. We are not aware of remaining bugs Try this on a secondary partition. Supplementary Informations for El Capitan.
Dosdude Big Sur Patcher
We're not responsible if you screw up your system. Technically, that won't happen as you can always go back to Lion. Then, choose the partition you want to install El Capitan on. Click install and prompt your password. Click reboot.
Available Patches
Your computer should reboot with the OSXHackers logo. Once booted, Click Continue, Agree and choose the only partition showed. Click reboot when you see 'Installation succeeded! Then, choose the disk you want to install the El Capitan installer on. Click exit.
Once booted, Click Continue, Agree and choose the partition you want to install on.
All other company and product names are trademarks or registered trademarks of their respective companies. Change Patcher. A: Preparing The Installation Drive 1.Salve a Tutti, ieri ho formattato finalmente il mio iMac 27 Fine This entire process involves the use of my 'macOS Catalina Pat.
This is what I did for Step 3 After so much searching for an easy to use. The download page for the v. Reminds me of the android scene, loads of random forum posts, zips uploaded to rapidshare and blind trust in hacked installers. What is TransMac Software? TransMac from Acute Systems is Windows software that can copy and manage files and folders on Apple drives and devices, including Mac-formatted hard drives, flash drives, and other storage devices, as well as open and burn disc images and.
I've been following the CM9 development in this forum and it seems as if JackpotClavin is try…. Je zal geen betere software vinden.
In this video, I go over the process of installing macOS I've tried two different USB. Transmac is a paid software, however, it offers 15 days of trial which is enough for you to create the bootable USB.
I updated it to High Sierra using the dosdude1 patches. With the Catalina patcher from DosDude1 the installer can be tricked to allow installation.
If for some reason updates aren't showing up, or are not installing correctly, you will need to re-install the Software Update Patch using the Patch Updater application. Download the macOS Mojave DosDude1's scripts cover a brevity of Macs, including the Mac Pro 3. By using this patching software on your Unsupported Mac, you can enjoy the various features and added security that modern Macs have. For more information on how to create a Windows 10 bootable media, check out this article.
System updates, such as EOS Utility 3. Download macOS Catalina Datei vom Juli sollte eigentlich nach all den er Sec. This entire process involves the use of my 'macOS Mojave Patcher. I wrote these articles on upgrading to each: Check the.
He's talking about people. Here at this site we offer a service for free to unlock iCloud locked devices without invalidating your warranty.Current Version: 1. When installing, ensure your system is plugged in to power, or the update will not be installed. Running Catalina without full graphics acceleration will result in extremely poor system performance. I get an error saying 'The installer is damaged, and can't be used to install macOS' This happens when using a release of the macOS Catalina Installer App that is incompatible with the version of Catalina Patcher you are using.
Dosdude Patcher Catalina Reviews
Dosdude1 Patcher
Download the latest Catalina Installer using the latest Catalina Patcher version. Some third-party applications do not open or crash on launch This is an issue Apple introduced in To work around this, immediately relaunch the affected application after receiving the crash message.
After that point, the affected application should no longer experience this crash. During installation, the machine keeps booting off the installer volume, and will not complete the second phase of installation This usually occurs on machines that support High Sierra macOS Installing High Sierra on these machines will update the machine's system firmware, allowing it to boot from an APFS volume.
This is necessary in order to boot Catalina. Please follow the instructions in the 'Important Info' section above to rectify. During installation, the installer reports that 'An error occurred during installation', and mentions running diagnostics This occurs when the copy of the macOS Catalina Installer app used has gotten corrupted somehow.
The Zoom application does not show any video during meetings This is due to the latest Zoom versions requiring a Metal-compatible GPU for video rendering. To patch this out of the Zoom application, download and run the script located hereor here for later Zoom versions. Download Latest Version View Changelog. Current Version Info Current Version: 1.
Tutorial Video.Want to run MacOS Catalina Then you may be interested in a third party tool that allows advanced uses to patch the MacOS Catalina installer so that it works on otherwise unsupported Macs. If this sounds interesting to you, check out the link below to learn more about the DosDude Catalina Patcher utility, and you can view a video tutorial further below showing how it works. DosDude has been tweaking with the MacOS system installers for a while, and you may recall a past article discussing running macOS Mojave on unsupported Macs too using a similar patch.
As you can see, that list is significantly broader than what is on the list of MacOS Catalina compatible Macs.
Catalina on Unsupported Macs
This is very much a third party tweak, and is of course not supported by Apple in any way. The video below demonstrates a tutorial walking through the process of using the DosDude Catalina patcher tool to install the macOS Enjoy this tip? Subscribe to the OSXDaily newsletter to get more of our great Apple tips, tricks, and important news delivered to your inbox! Enter your email address below:. Nothing happens. Any idea? Hi, Thanks for providing this patch. I have used your el capitan and high sierra patches in the past.
I have created to bootable USB as per your instructions. I am able to boot off it using my macbook air. Yesterday I upgraded my iMac early from Yosemite to Catalina without any problems. I put in a gb ssd and 6gb ram. The filesystem conversion runs automatically when you reinstall macos. Thanks for the great job!
Last week I did the usb bootable creation process with Catalina Patcher…everything was okay. When the time arrive for booting with the usb flash the process starts and goes while 30 secondes and a incompatible icon installation appears like a white wheel with a bar on it.
No possibility to do an install of Catalina.